Der Primer ist auf trockenen Untergrund ( max.
4 % Restfeuchte ) aufzutragen und muss je nach Temperatur 30 Minuten bis 2 Stunden ablüften, ohne jedoch vollständig abzutrocknen.
Nichtsaugende Untergründe ( Gussstahl, Polymerbeton ) sind mit PRIMER PK 2 zu grundieren.
www.proxan.deThe primer has to be applied on dry substrate ( max.
4 % residual moisture ) and it has to vent depending on the ambient temperature for 30 minutes to 2 hours, without drying completely.
Non-porous substrates ( mastic asphalt, polymer concrete ) have to be primed with PROXAN PRIMER PK 2.
www.proxan.deReinigungsvorgang bei Bedarf wiederholen.
Lösemittel ablüften lassen, bis die Oberflächen abgetrocknet sind.
WEICON Klebstoff nach Gebrauchsanweisung auftragen und Teile zusammenfügen.
www.weicon.comRepeat the cleaning process if necessary.
Let the solvents evaporate until the surfaces have dried.
Apply WEICON adhesives according to the instructions of use and join the parts
www.weicon.comDer Primer ist auf trockenen Untergrund ( max.
4 % Restfeuchte ) aufzutragen und muss je nach Temperatur 30 Minuten bis 2 Stunden ablüften, ohne jedoch vollständig abzutrocknen.
Nichtsaugende Untergründe sind mit PRIMER PK 2 zu grundieren.
www.proxan.deThe primer has to be applied on dry subsoil ( max.
4 % residual moisture ) and has to flash off 30 min. to 2 hours depending on the temperature but without drying completely.
Non-porous surfaces have to be primed with PROXAN PRIMER PK 2.
www.proxan.deDa li Vam nedostaje određeni izraz ili prevod?
Poziv za kompajliranje OD unosa