Verfahren Ejector :
Das Ejector-Tiefbohrverfahren wird im Durchmesserbereich von ca. 18 bis 250 mm eingesetzt.
Die Zufuhr des Kühlschmiermittels erfolgt zwischen dem Bohrrohr und einem Innenrohr ( Zweirohrverfahren ).
www.tbt.deEjector procedure :
The ejector deep hole drilling procedure is utilised in the diameter range from approx. 18 to 250 mm.
The coolant lubricant feed is between the boring tube and an inner tube ( two tube system ) The coolant lubricant emerges at the side on the boring head, which it rinses, and flows back with the chips through the inner tube.
www.tbt.deOvde možete ostaviti obaveštenje o greškama u ovom unosu ili predloge za poboljšanja:
Kako funkcioniše izvoz u trener vokabulara?
Lista sa vokabularom nalazi se samo u veb-brauzeru. Nakon izvoza vokabulara u trener, ona će biti svuda dostupna.